Wireless TENS Unit | HealthmateForever Pulse Massager PRO6ABS
Menu
Cart
PRO6ABS HealthmateForever Wireless TENS Unit & Muscle Stimulator
PRO6ABS HealthmateForever Wireless TENS Unit & Muscle StimulatorPRO6ABS HealthmateForever Wireless TENS Unit & Muscle StimulatorPRO6ABS HealthmateForever Wireless TENS Unit & Muscle StimulatorPRO6ABS HealthmateForever Wireless TENS Unit & Muscle StimulatorPRO6ABS HealthmateForever Wireless TENS Unit & Muscle StimulatorPRO6ABS HealthmateForever Wireless TENS Unit & Muscle StimulatorPRO6ABS HealthmateForever Wireless TENS Unit & Muscle StimulatorPRO6ABS HealthmateForever Wireless TENS Unit & Muscle Stimulator
$ 134.99$ 139.99

6 Main massage-like modes each with 4 sub-modes give you more choices to enjoy the pain relief and muscle recovery process. Isolated AB channels allow separate mode and intensity settings to target two pain areas.

  • DETAILS
  • HOW TO USE
  • VIDEO
  • REVIEWS

24 Sub-Mode

6 Main massage-like modes each with 4 sub-modes. More choices, more relief, more recovery.

Isolated AB Channels

Separate your mode and intensity settings in channel A and Channel B to target different pain areas.

Improve Muscle Performance

Facilitate high muscle performance while enjoying the relaxing massage-like stimulation.

Doctor Recommended

HealthmateForever has over 5 years of health industry experience. Doctor recommended for over the counter use in pain relief.

Easy to Read the Animated Screen

Clear indicators of mode choices, current time left on the session, intensity and battery level. Backlit for using in dark environment. 


24

massage-Like modes

10-80 

minute adjustable timer

20 

levels of adjustable intensity

2

isolated outputs in channel A/B, both have 100% power


  • Rechargeable internal lithium battery

  • Adjustable mode and intensity in channel A or channel B

  • Easy to read animated backlit LCD Display

  • Wireless Pad feature compatible with WI9 

Mode list

24 preprogrammed massage modes with different waveforms:Tuina (Push & Pull), Acupuncture, Tapping, Guasha (Scraping), Cupping, and Combination


What's in the box

1 FDA cleared Class II OTC HealthmateForever Pro6ABS TENS & Muscle Stimulator


2 sets of self-adhesive electrode pads 2½ inches


2 sets of electrode wires (3.5mm plug)


1 USB Charger/Wall Unit 1

(international travel charger 110V - 240V)


User Manual


Warranty Card


1 Pads Holder


2 Wireless Transmitters


2 Receivers


4 sets of self-adhesive large oval electrode pads



Tech specs

Output pulse width: 90μS ± 15%


Pulse Frequency: <100HZ


Max output amplitude: <5v (r.m.s)


Input Voltage: DC5V


Rated current: ≤ 50mA

Rated Power: ≤ .25W




For User Manual, please email us at support@healthmateforever.com.

Step 1: 

Connect electrode wires with control unit.

  • The Pro6ABS is equipped with two isolated channels A&B. This will allow you to set separate modes and separate intensities on each channel. Before connecting the wires to the unit, decide which channel you wish to use (channel A or B). To use A channel only, connect the electrode wire(s) to output A. To use B channel only, connect the electrode wire(s) to output B. To use both A, B channels, please connect wires to all outputs. 

1. Plug the electrode wire into the output located on the bottom of the device. Depending on your needs, you may use one or two outputs.

2. Ensure that the electrode wires are fully inserted into the output and secured. Make sure the wires are not loose. A loose connection will lower the power output of your device, potentially causing unreliable connection.

3. Repeat steps 1 & 2 to connect another wire.


Step 2: 

Connect electrode pads with wires.

1. Each wire has two leads with snap-on connectors. Snap the wire connectors onto the snap on buttons on the pads. 

2. Make sure at least one pair of pads is attached to the same wire. 

3. Check the snap connections to ensure they are fastened. 

4. Remove the plastic films on the pads.


Step 3: 

Place pads on your body.

  • Place pads on the muscle you would like to treat. Place the adhesive side of pad on your skin.


Step 4: 

Turn on the control unit.

  • Push the “ON/OFF” switch located on the top of the unit to the ON position.


Step 5: 

Select modes and intensity.

  • You can see 6 different modes with four numbers on each corner of the mode on the screen. This model Pro6ABS has 6 operating modes. Each operating mode has 4 sub-programs, so there are total 24 different programs. 
  • Verify the channel indicator on the screen to make sure the device is on the same channel you wish to use. The “A” letter will blink to indicate channel A is working. The “B” letter will blink to indicate channel B is working. 
  • The device will automatically set to channel A, sub-program 1 of mode 1, with zero intensity. 
  • Press “M” (Mode) button to select sub-programs under the 6 modes. Long press the “M” (Mode) button for 2-3 seconds to select 6 modes. When you select a mode, the device will automatically select sub-program 1 of this mode. 
  • Note: The number icons around each mode icon indicate 4 different sub-programs. For example, if “3” icon of mode number 3 is displaying, it means you are on sub-program 3 of mode number 3. 
  • Press the channel switch button once to switch between channel A and B. Then select modes by following the instruction above for each channel separately.


Step 6: 

Adjust intensity.

  • Press the intensity “+”“-” button to set the desired intensity. 
  • Press intensity “+” button to increase the intensity. 
  •  Press intensity “-” button to decrease the intensity. 
  • When switching modes, the intensity will automatically set zero. Repeat step 6 after changing the mode. 
  • As mentioned previously, this device is equipped with two isolated channels A&B. You will need to adjust the intensity for each channel separately by pressing the mode switch button.

Step 7: 

Adjust timer. 

  • Press the “T” button to adjust the timer.

Step 8: 

Turn off the device.

  • Push the “ON/OFF” switch.

Step 9: 

Remove the pads from your skin.

  • Remove the pads from your skin softly and place them back on the provided pad holder or the protective plastic film. 
  • DO NOT remove the pads before you turn off the device.

Step 10: 

Take off the pads from wires. Unplug wires from the device.

  • Take off the pads from wires. Unplug wires from the device.