Attach TS10ABV to your fitness gear with one simple clip. Slim, lightweight and portable. Touch to select different mode and intensity in isolated AB channels.
Isolated AB Channels
Separate your mode and intensity settings in channel A and Channel B to target different pain areas.
Attach it to your fitness gear with one simple clip. Run, jump, and stretch out like it's not even there.
Safe Pain Management
Interrupts pain signals from reaching the brain. Non- Invasive, All- Natural and Drug-free.
Touchscreen with Quick Access Buttons
Start, pause, intensity up/down the program with just one click. Stylus pen available.
Effective Muscle Recovery
Fast recovery from muscle soreness after intense exercise or playing your favorite sport. Always ready for the next challenge!
minute adjustable timer
levels of adjustable intensity
isolated outputs in channel A/B, both have 100% power
Rechargeable internal lithium battery
Adjustable mode and intensity in channel A or channel B
Pause Button - Pause and Restart at anytime
Specially designed safety lock button to prevent any incautious clicks
Tuina (Push and Pull), Acupuncture, Tapping, Guasha (Scraping), Cupping, Shiatsu, Pressure, Body Building, Body Building2, and Combination
What's in the box
1 FDA cleared Class II OTC HealthmateForever TS10ABV TENS & Muscle Stimulator
4 piece self-adhesive conductive reusable gel pads
2 sets of electrode wires (2.5mm plug)
1 USB Charger/Wall Unit (international travel charger 110V - 240V)
2 Pads Holders
1 stylus pen
Output pulse width: 90μS ± 15%
Pulse Frequency: <100HZ
Max output amplitude: <5v (r.m.s)
Screen size: 4.8" L x 1.6" W
Size: 4.8" L x 1.6" W x 0.5" T
Weight: 2.1 oz
For User Manual, please email us at firstname.lastname@example.org.
Connect electrode wires with control unit.
1. Plug the electrode wire into the device.
2. Ensure that the electrode wires are fully inserted and secured.
3. Repeat steps 1 & 2 to connect another wire.
Connect electrode pads with wires.
1. Each wire has two leads with snap-on connectors. Snap the wire connectors onto the snap on buttons on the pads.
2. Make sure at least one pair of pads is attached to the same wire.
3. Ensure that the snap on connections are fastened.
4. Remove the plastic films on the pads.
Place pads on your body.
Turn on the control unit.
Turn off the device.
Remove the pads from your skin.
Take off the pads from wires. Unplug wires from device.