Selected customer's favorite pain relief and relaxing modes. It's easy to customize your pain relief experience with a large touchscreen. Lock function avaliable.
Selected Body Pain Relief & Massage-Like Modes
A selection of the favorite pain relief and relaxing modes proved by millions of customers.
Large Touchscreen with Backlit Display
User-friendly interface with easy to understand icons. Select channel, mode, intensity and start enjoying your relief.
Combined TENS & Muscle Stimulator Technologies
One device with double value, double relief. Safe, Non- Invasive, All- Natural and Drug free.
Equipped with rechargeable battery, up to 10 hours of continuous use. USB charging available.
Separate Modes and Intensities Settings
Customize your own pain relief mode & intensity to relax different pain areas at the same time! Match your needs however you want.
minute adjustable timer
levels of adjustable intensity
isolated outputs in channel A/B, both have 100% power
Rechargeable internal lithium battery
Specially designed safety lock button to prevent any incautious clicks.
Easy to read animated backlit LCD Display
Three pairs of different size & shape of self-adhesive gel pads included in the box
Tuina (Push & Pull), Acupuncture, Tapping, Guasha (Scraping), Cupping, Shiatus (Finger Press), Pressure, Back Pain, Deep Tissue Massage, Body Building, Body Building2, Combination, Shoulder, Neck, Back, Elbow, Hip, Ankle, Foot, Hand, Knee, Wrist, Reflexology, and TENS
What's in the box
1 FDA cleared Class II OTC HealthmateForever T24AB TENS & Muscle Stimulator
6 piece self-adhesive conductive reusable gel pads
2 sets of electrode snap-on wires (3.5mm plug)
1 USB Charger/Wall Unit 1 pads holder (international travel charger 110V - 240V)
1 stylus for touchscreen
1 Pads Holder
Output pulse width: 90μS ± 15%
Pulse Frequency: <100HZ
Max output amplitude: <5v (r.m.s)
Input Voltage: DC5V
Rated current: ≤ 50mA
Rated Power: ≤ .25W
Screen size: 2" W x 3.5" L
Size: 2.5" L x 4.75" W x .5" T
Weight: 4.3 oz
For User Manual, please email us at firstname.lastname@example.org.
Connect electrode wires with control unit.
1. Plug the electrode wire into the device.
2. Ensure that the electrode wires are fully inserted and secured.
3. Repeat steps 1 & 2 to connect another wire.
Connect electrode pads with wires.
1. Each wire has two leads with snap-on connectors. Snap the wire connectors onto the snap on buttons on the pads.
2. Make sure at least one pair of pads is attached to the same wire.
3. Ensure that the snap on connections are fastened.
4. Remove the plastic films on the pads.
Place pads on your body.
Turn on the control unit.
Turn off the device.
Remove the pads from your skin.
Take off the pads from wires. Unplug wires from device.