Best TENS unit Electronic Pulse Massager | HealthmateForever
Menu
Cart

Upgrade Version HealthmateForever YK15RC TENS Unit & Muscle Stimulator
Free Gift

  • $ 119.99
  • Save $ 180.00


  • 1 FDA cleared Class II OTC HealthmateForever Upgrade Version professional YK15RC electroTherapy device (combined TENS unit and Muscle Stimulator)
  • 8 piece self-adhesive conductive reusable electrode pads with inserted pin
  • 4 sets of inserted pin electrode wires (3.5 mm plug)
  • 1 Pads holder
  • 1 USB Charger/Wall Unit (International travel charger is 110V-240V),
  • 1 removable replaceable rechargeable lithium battery
  • User Manual
  • Lifetime Warranty Card
  • VIP card
  • Note: YK15RC updated user manual
  • If any questions or concern please feel free to contact us.
  • Combined necessary features and functions of YK15 and YK15AB devices, easier to use, smaller size than YK15 or YK15AB. 
  • 15 preprogrammed electronic pulse massager massage modes:
    9 custom designed modes: Neck, Shoulder, Back, Elbow, Hip, Ankle, Knee, Foot/hand, Wrist;  
    6 therapeutic methods: Knead, Acupuncture, Tapping, Cupping, Scraping, Random.
  • 1 Rechargeable Lithium Battery (Also removable replaceable by user)
  • Default timer: 80 minutes, but adjustable 10-80 minutes. When time is due, it is automatically shut off.
  • 20 levels of adjustable intensity in either channel A1, A2 or channel B1, B2. You can treat two different areas with different intensity at the same time
  • Speed+ button increases frequency of mode 
  • Speed- button decreases frequency of mode
  • 4 output design with 2 independent channels A1, A2 and B1, B2.
  • Allows 8 pads to be used at the same time
  • Easy to read animated back-lit LCD Display
  • Belt Clip , easy to carry anywhere
    HealthmateForever listened to customer feedback and incorporated most-requested features, upgrade software and hardware of model: YK15, model YK15AB in the new professional unit YK15RC, easier to adjust time, intensity and speed, Belt Clip, Back-lit LCD display, adjustable timer, 4 outputs has 100% power, 4 output design with 2 independent channels A1, A2 and B1, B2.in intensity and speed, you will want to order your YK15RC today,sooth your pain away! Enjoy unlimited soothing massage.
  • If any questions or concern please feel free to contact us.

Electronic pulse massager Output Parameters:

  • Output pulse width: 90 μS ± 15%
  • Pulse Frequency: <100 HZ
  • Max output amplitude: <5v (r.m.s)
  • Electrode wire plug diameter 3.5 mm

Input Parameters:

  • Input voltage: DC 4.5 V
  • Rated current:   ≤ 50 mA
  • Rated power: ≤  0.225 W 
  • Temperature range: 0°C to 48°C
  • Humidity: 10% to 85%
  • Atmospheric Pressure: 400 hPa to 1060 hPa
  • Screen size: 1.75" W x 1" L
  • Size: 6.25" L x 2.25" W x .75" T
  • Weight: 4.2oz
  • Patent Number: US D723, 178S

If any questions or concern please feel free to contact us.

Step 1: Check battery.

  1. On the back of your device, remove the battery compartment cover by sliding the cover down.
  2. Check for any leakage, dents, or irregularities on the lithium ion battery.
  3. Put back the battery compartment cover by sliding it upwards until it is fastened

Step 2: Connect electrode wires with the device.

YK15RC is equipped with two independent channels A&B.  This will allow you to set separate intensities on each channel using the 4 outputs A1, A2, B1, and B2. Before connecting the wires to the unit, decide which channel you wish to use (channel A or B). To use A channel only, connect the electrode wire(s) to outputs A1 and/or A2. To use B channel only, connect the electrode wire(s) to outputs B1 and/or B2. To use both A, B channels, please connect wires to all outputs.

  1. Plug the electrode wire into the output located at the top of the device. Depending on your needs, you may use up to four outputs.
  2. Ensure that the electrode wires are fully inserted and secured.
  3. Repeat steps 1 and 2 to connect another wire.

Step 3: Connect electrode pads with wires.

  1. Each wire has two leads with pin-inserted connectors. Plug the pin-insert wire connectors into pin-insert pads.
  2. Make sure at least one pair of pads are attached to the same wire.
  3. Ensure that the pin-insert connections are fastened.
  4. Remove the plastic films on the pads.

Step 4: Place pads on your body.

Place pads on the area you would like to treat. Place the adhesive side of pad on your skin.

Step 5: Turn on the device and select channel.

Push the “ON/OFF” switch located on the right side of the device to the ON position.

The device will start showing all icons for 1 seconds to ensure that all icons are displayed properly. 

Step 6: Select modes.

The independent channel on the YK15RC will NOT allow you to set separate modes on each channel.  It will only allow you to set separate levels of intensity. Channels A & B will share the same mode.

Select any mode you wish to use by pressing any of the modes. All blue buttons are modes. For example, if you wish to use “BACK” mode, you need to press the “BACK” button on the device. The selected mode will blink on the display to indicate the mode selected.

Step 7: Adjust intensity and speed.

For outputs A1 & A2

To set the intensity for A outputs (A1 & A2), press the channel A button. On the display, the A letter will blink to indicate you are on channel A.

            Use the intensity “+” to increase the intensity.

            Use the intensity “-” to decrease the intensity.

For outputs B1 & B2

To set the intensity for B outputs (B1 & B2), press the channel B button. On the display, the B letter will blink to indicate you are on channel B.

            Use the intensity “+” to increase the intensity.

            Use the intensity “-” to decrease the intensity.

The device is equipped with an adjustable speed option. This will allow you to control the speed of the pulsation on any of the modes.  For example, when choosing the Tapping mode or “TAP”, you can adjust the speed of the Tapping. To use this option, the mode and intensity must be selected first:

Press speed “+” button to increase the intensity. 

Press Speed “-” button to decrease the intensity. 

Step 8: Adjust timer.

The device has an 80 minute adjustable timer. Use the timer + & timer – buttons located on the left side of the device to adjust the timer as desired.

Step 9: Turn off the device.

Push the “ON/OFF” switch located at the right side of the device to the OFF position.

Step 10: Remove the pads from your skin.

Remove the pads from your skin softly and place them back on the provided pad holder or the protective plastic film.

DO NOT remove the pads before you turn off the device.

Step 11: Take off the pads from wires. Unplug wires from device.