Pad & Wire Holder for TENS Electrotherapy Device | HealthmateForever
FLASH SALE Pad and Wire Holder
FLASH SALE Pad and Wire Holder
$ 7.99$ 2.00

Combined touchscreen and physical button control, TS8AB is easy to read and operate. Isolated A/B channels effectively relieve different pain areas with separate mode and intensity.


Improve Muscle Performance

Facilitate high muscle performance while enjoying the relaxing massage-like stimulation.

User-Friendly Touch Screen

Big and clear designed animated mode icons combined with channel/intensity buttons make your pain relief selection easy and accurate. 

Slim & Portable

A slim and sleek body design that fits in your pocket perfectly. Relieve anywhere, anytime you want.

USB Rechargeable

Easy to charge with your computer, laptop or regular adapter to never let "out of battery" stop your pain relief.

Individual Modes and Intensities Settings

Customize your own pain relief mode and intensity in A/B channels to relax multiple pain areas at the same time!


massage-Like modes


minute adjustable timer


levels of adjustable intensity


isolated outputs in channel A/B, both have 100% power

  • Rechargeable internal lithium battery - up to 10 hours of continuous use

  • Adjustable mode and intensity in channel A or channel B

  • Easy to read animated backlit LCD Display

  • Pause Button – Pause and Restart at anytime

Mode list

Tuina (Push and Pull), Acupuncture, Tapping, Guasha (Scraping), Cupping, Body Building, Body Building2, and Combination

What's in the box

1 FDA cleared Class II OTC HealthmateForever TS8AB TENS & Muscle Stimulator

4 piece self-adhesive conductive reusable gel pads

2 sets of electrode wires (3.5mm plug)

1 USB Charger/Wall Unit (international travel charger 110V - 240V)

User Manual

Warranty Card

2 Pads Holders

1 stylus pen

Tech specs

Output pulse width: 90μS ± 15%

Pulse Frequency: <100HZ

Max output amplitude: <5v (r.m.s)

3.5mm Plug

Screen size: 1.7" W x 2.6" L

Size: 4" L x 2" W x .5" T

Weight: 5.5 oz

For User Manual, please email us at

Step 1: 

Connect electrode wires with control unit.

  • This device is equipped with two isolated channels A&B. This will allow you to set separate modes and separate intensities on each channel. Before connecting the wires to the unit, decide which channel you wish to use (channel A or B). To use A channel only, connect the electrode wire(s) to output A. To use B channel only, connect the electrode wire(s) to output B. To use both A, B channels, please connect wires to all outputs. 

1. Plug the electrode wire into the device. 

2. Ensure that the electrode wires are fully inserted and secured. 

3. Repeat steps 1 & 2 to connect another wire.

Step 2: 

Connect electrode pads with wires.

1. Each wire has two leads with snap-on connectors. Snap the wire connectors onto the snap on buttons on the pads. 

2. Make sure at least one pair of pads is attached to the same wire. 

3. Ensure that the snap on connections are fastened. 

4. Remove the plastic films on the pads.

Step 3: 

Place pads on your body.

  • Place pads on the muscle you would like to treat. Place the adhesive side of pad on your skin.

Step 4: 

Turn on the control unit.

  • Push the “ON/OFF” switch. 
  • The device will start showing all icons for 2 seconds to ensure that all options are displayed properly.

Step 5: 

Select modes.

You can see some different modes on the screen. 

1. The device will automatically set to channel A, mode 1 with zero intensity. 
2. To select the mode for channel A, touch any of the modes displayed on the screen. The selected mode will blink. 
3. Press the channel switch button once to switch to channel B. The B letter will blink to indicate channel B is working. 
4. To select the mode for channel B, touch any of the modes displayed on the screen. The selected mode will blink. 
5. When changing the mode, the intensity level will automatically reset zero.

Step 6: 

Adjust timer.

  • Touch the time (number displayed) to adjust timer.

Step 7: 

Adjust intensity

  • Press the intensity “+”“-” button to set the desired intensity. 
  • Press intensity “+” button to increase the intensity.Press intensity “-” button to decrease the intensity. 
  • When switching modes, the intensity will automatically set zero. Repeat step 7 after changing the mode. 
  • As mentioned previously, this device is equipped with two isolated channels A&B. You will need to adjust the intensity for each channel separately by pressing the mode switch button. 
  • You have the option to use one channel alone or both channels

Step 8: 

Turn off the device.

  • Push the “ON/OFF” switch.

Step 9: 

Remove the pads from your skin.

  • Remove the pads from your skin softly and place them back on the provided pad holder or the protective plastic film. 
  • DO NOT remove the pads before you turn off the device.

Step 10: 

Take off the pads from wires. Unplug wires from device.

  • Take off the pads from wires. Unplug wires from device.