Best Pain Relief TENS & PMS Device | HealthmateForever YK15RC
Menu
Cart
Upgrade Version HealthmateForever YK15RC TENS Unit & Muscle Stimulator
Upgrade Version HealthmateForever YK15RC TENS Unit & Muscle StimulatorUpgrade Version HealthmateForever YK15RC TENS Unit & Muscle StimulatorUpgrade Version HealthmateForever YK15RC TENS Unit & Muscle StimulatorUpgrade Version HealthmateForever YK15RC TENS Unit & Muscle StimulatorUpgrade Version HealthmateForever YK15RC TENS Unit & Muscle StimulatorUpgrade Version HealthmateForever YK15RC TENS Unit & Muscle StimulatorUpgrade Version HealthmateForever YK15RC TENS Unit & Muscle StimulatorUpgrade Version HealthmateForever YK15RC TENS Unit & Muscle StimulatorUpgrade Version HealthmateForever YK15RC TENS Unit & Muscle StimulatorUpgrade Version HealthmateForever YK15RC TENS Unit & Muscle StimulatorUpgrade Version HealthmateForever YK15RC TENS Unit & Muscle StimulatorUpgrade Version HealthmateForever YK15RC TENS Unit & Muscle StimulatorUpgrade Version HealthmateForever YK15RC TENS Unit & Muscle Stimulator
$ 119.99

More portable, easier to control, 100% power in each output and is rechargeable. YK15RC is the upgraded version of our customer's favorite model YK15AB.

  • DETAILS
  • HOW TO USE
  • VIDEO
  • REVIEWS

Rechargeable Battery

No more hassle in charging batteries with the new long-lasting rechargeable battery.

Belt Clip

Pain relieve on the go with the mobile belt clip.

Mode Buttons 

Easy to read & operate buttons for each targeted body pain & Massage-like modes, timer, intensity and speed controls.

Frequency Adjustment

Adjustable speed allows you to find the perfect pain relief experience based on your needs.

Upgraded Version of YK15AB

We always listen to our customers, YK15RC is more portable, easier to control and has 100% power in each output. Moreover, it's rechargeable!


15

massage-Like modes

10-80 

minute adjustable timer

20 

levels of adjustable intensity

4

outputs with independent channels A1/A2 or B1/B2


  • Rechargeable internal lithium battery

  • Adjustable intensity in channel A1/A2 or channel B1/B2

  • Easy to read animated backlit LCD Display

  • Allows 8 pads to be used at the same time

  • Belt clip equipped

Mode list

9 custom designed modes: Neck, Shoulder, Back, Elbow, Hip, Ankle, Knee, Foot/hand, And Wrist; 

6 therapeutic methods: Knead, Acupuncture, Tapping, Cupping, Scraping, and Random.


What's in the box

1 FDA cleared Class II OTC HealthmateForever YK15RC TENS & Muscle Stimulator


8 piece self-adhesive conductive reusable gel pads with inserted pin


4 sets of electrode wires (3.5mm plug)


1 removable replaceable rechargeable lithium battery


1 USB Charger/Wall Unit (International travel charger is 110V-240V)


User Manual


Warranty Card


1 Pads Holder


Tech specs

Electronic pulse massager Output Parameters:

Output pulse width: 90μS ± 15%


Pulse Frequency: <100HZ


Max output amplitude: <5v (r.m.s)


Electrode wire plug diameter 3.5 mm


Input Parameters:

Input Voltage: DC 4.5V


Rated current: ≤ 50mA


Rated Power: ≤ 0.225W


Temperature range: 0°C to 48°C 


Humidity: 10% to 85% 


Atmospheric Pressure: 400 hPa to 1060 hPa



Screen size: 1.75" W x 1" L


Size: 6.25" L x 2.25" W x .75" T


Weight: 4.2 oz


Patent Number: US D723, 178S



For User Manual, please email us at support@healthmateforever.com.

Step 1: 

Check battery.

1. On the back of your device, remove the battery compartment cover by sliding the cover down. 
2. Check for any leakage, dents, or irregularities on the lithium ion battery. 
3. Put back the battery compartment cover by sliding it upwards until it is fastened.

Step 2: 

Connect electrode wires with control unit.

  • YK15RC is equipped with two independent channels A&B. This will allow you to set separate intensities on each channel using the 4 outputs A1, A2, B1, and B2. Before connecting the wires to the unit, decide which channel you wish to use (channel A or B). To use A channel only, connect the electrode wire(s) to outputs A1 and/or A2. To use B channel only, connect the electrode wire(s) to outputs B1 and/or B2. To use both A, B channels, please connect wires to all outputs.

1. Plug the electrode wire into the output(s) located at the top of the device. Depending on your needs, you may use one, two, three or four outputs. 

2. Ensure that the electrode wires are fully inserted and secured into the output. 

3. Repeat steps 1 & 2 to connect another wire.


Step 3: 

Connect electrode pads with wires.

1. Each wire has two leads with pin-insert connectors. Plug the male pin-insert end on the wire into the female pin-insert connector on the pads. 
2. Make sure at least one pair of pads is attached to the same wire. 
3. Ensure that the pin-insert connections are fastened.
4. Remove the plastic films on the pads.


Step 4: 

Place pads on your body.

  • Place pads on the area you would like to treat. Place the adhesive side of pad on your skin.


Step 5: 

Turn on the device and select channel.

  • Push the “ON/OFF” switch located on the right side of the device to the ON position. 
  •  The device will start showing all icons for 1 seconds to ensure that all icons are displayed properly. 


Step 6: 

Selecting modes.

  • The independent channel on the YK15RC will NOT allow you to set separate modes on each channel. It will only allow you to set separate levels of intensity. Channels A & B will share the same mode. 
  • Select any mode you wish to use by pressing any of the modes. All blue buttons are modes. For example, if you wish to use “BACK” mode, you need to press the “BACK” button on the device. The selected mode will blink on the display to indicate the mode selected.

Step 7: 

Adjust intensity and speed.

For outputs A1 & A2 

To set the intensity for A outputs (A1 & A2), press the channel A button. On the display, the A letter will blink to indicate you are on channel A. 
      Use the intensity “+” to increase the intensity. 
      Use the intensity “-” to decrease the intensity. 

For outputs B1 & B2 

To set the intensity for B outputs (B1 & B2), press the channel B button. On the display, the B letter will blink to indicate you are on channel B. 
      Use the intensity “+” to increase the intensity. 
      Use the intensity “-” to decrease the intensity. 

The device is equipped with an adjustable speed option. This will allow you to control the speed of the pulsation on any of the modes. For example, when choosing the Tapping mode or “TAP”, you can adjust the speed of the Tapping. To use this option, the mode and intensity must be selected first: 
      Press speed “+” button to increase the intensity. 
      Press Speed “-” button to decrease the intensity. 

Step 8: 

Adjust timer.  

  • The device has an 80 minute adjustable timer. Use the timer + & timer – buttons located on the left side of the device to adjust the timer as desired.

Step 9: 

Turn off the device.

  • Push the “ON/OFF” switch located at the right side of the device to the OFF position.

Step 10: 

Remove the pads from your skin.

  • Remove the pads from your skin softly and place them back on the provided pad holder or the protective plastic film.DO NOT remove the pads before you turn off the device.

Step 11: 

Take off the pads from wires. Unplug wires from device.

  • Take off the pads from wires. Unplug wires from device.