​ ​ ​ ​ ​ ​ ​ ​ HealthmateForever Best Personal Massager on the market

Touch Screen TS10AB HealthmateForever TENS Unit & Muscle Stimulator 30% OFF USE COUPON CODE: SALE30

  • $ 96.99
  • Save $ 43.00


  • 1 Double Value 2in1 FDA cleared Class II OTC HealthmateForever touch screen TS10AB electroTherapy device (combined TENS unit and Muscle Stimulator)
  • 4 piece self-adhesive conductive reusable gel pads
  • 2 sets of electrode wires (3.5mm plug)
  • 1 USB Charger/Wall Unit (international travel charger 110V - 240V)
  • 2 Pads holders
  • 1 stylus pen
  • User Manual
  • Lifetime Warranty Card
  • For User Manual, please email us at support@healthmateforever.com.
  • If any questions or concern please feel free to contact us.
  • Touch Screen
  • 10 preprogrammed massage modes with different waveforms:
    • Tuina (Push and Pull), Acupuncture, Tapping, Guasha (Scraping), Cupping, Shiatsu, Pressure, Body Building, Body Building2, and Combination
  • Adjustable 10-80 minute timer
  • 20 levels of adjustable intensity
  • Adjustable mode and intensity in channel A or channel B
  • Dual outputs are isolated, so both channel A and channel B has the same 100% power, without reducing strength in half
  • Allows 4 pads to be applied to the two different targeted areas at the same time;
  • Rechargeable internal lithium battery – up to 10 hours of continuous use
  • Easy to read animated Large backlit LCD Display
  • If any questions or concern please feel free to contact us.
  • Output pulse width: 90μS ± 15%
  • Pulse Frequency: <100HZ
  • Max output amplitude: <5v (r.m.s)
  • 3.5mm plug
  • Screen size: 1.7" W x 2.6" L
  • Size: 4L x 2W x .5T
  • Weight: 5.5 oz
  • If any questions or concern please feel free to contact us.

Step 1: Connect electrode wires with control unit.

This device is equipped with two isolated channels A&B. This will allow you to set separate modes and separate intensities on each channel. Before connecting the wires to the unit, decide which channel you wish to use (channel A or B). To use A channel only, connect the electrode wire(s) to output A. To use B channel only, connect the electrode wire(s) to output B. To use both A, B channels, please connect wires to all outputs.

  1. Plug the electrode wire into the device.
  2. Ensure that the electrode wires are fully inserted and secured.
  3. Repeat steps 1 & 2 to connect another wire.

Step 2: Connect electrode pads with wires.

  1. Each wire has two leads with snap-on connectors. Snap the wire connectors onto the snap on buttons on the pads.
  2. Make sure at least one pair of pads is attached to the same wire.
  3. Ensure that the snap on connections are fastened.
  4. Remove the plastic films on the pads.

Step 3: Place pads on your body.

Place pads on the muscle you would like to treat. Place the adhesive side of pad on your skin.

Step 4: Turn on the control unit.

Push the “ON/OFF” switch.

The device will start showing all icons for 2 seconds to ensure that all options are displayed properly.

Step 5: Select modes.

You can see some different modes on the screen.

  1. The device will automatically set to channel A, mode 1 with zero intensity.
  2. To select the mode for channel A, touch any of the modes displayed on the screen. The selected mode will blink.
  3. Press the channel switch button once to switch to channel B. The B letter will blink to indicate channel B is working.
  4. To select the mode for channel B, touch any of the modes displayed on the screen. The selected mode will blink.
  5. When changing the mode, the intensity level will automatically reset zero.

Step 6: Adjust timer.

Touch the time (number displayed) to adjust timer.

Step 7: Adjust intensity.

Press the intensity “+”“-” button to set the desired intensity.

Press intensity “+” button to increase the intensity.

Press intensity “-” button to decrease the intensity.

When switching modes, the intensity will automatically set zero. Repeat step 7 after changing the mode.

As mentioned previously, this device is equipped with two isolated channels A&B. You will need to adjust the intensity for each channel separately by pressing the mode switch button.

You have the option to use one channel alone or both channels.

Step 8: Turn off the device.

Push the “ON/OFF” switch.

Step 9: Remove the pads from your skin.

Remove the pads from your skin softly and place them back on the provided pad holder or the protective plastic film.

DO NOT remove the pads before you turn off the device.

Step 10: Take off the pads from wires. Unplug wires from device.